380501 Xray M18T Pro
Product Description
This item does not qualify for free shipping because it will ship USPS PRIORITY MAIL so you will get it fast.
The M18T PRO chassis is all new, designed specifically for high-performance racing. The 2.0mm thick chassis has been optimized for strength in high-grip racing conditions, while still being flexible enough for low-grip track conditions. The length of the chassis has been optimized for better racing and jumping; it is now 16mm longer.
The chassis is CNC-machined from the premium high-grade carbon fiber (graphite) material on ultra-precise German CNC routing machines, ensuring the highest precision and tolerances in all critical areas.
An inline 6-cell battery pack sits on the left side of the chassis, with composite battery holders ensuring the pack stays in place.
The top deck has been completely redesigned and re-engineered. CNC-machined from premium high-grade carbon fiber (graphite), the top deck is much better suited to survive hard impacts while keeping set-up and geometry unchanged.
The top deck features a smart design to ensure that all bulkhead and arm mounting screws are easily and instantly accessible.
The 6-cell inline battery pack is held in place by a CNC-machined battery holder made from premium carbon fiber, completed with a stylish, milled �X� The chassis features battery backstops to keep the the pack in place even after serious crashes. The battery stops may be mounted in two different positions to accommodate side-by-side or inline battery packs.
The composite drive shafts of the M18T have been replaced with the HUDY Spring Steel� drive shafts. Manufactured from world-renowned top-secret HUDY Spring Steel�, these race-quality drive shafts are the smallest in the world, exclusively manufactured by HUDY. The drive shaft have been strategically lightened to reduce rotating mass without compromising strength or durability.
The ultra-efficient drivetrain from the coveted M18T has been carried over to the M18T PRO, as it has proven itself to be the most efficient and effective micro car drivetrain system. The inline, super-efficient single drive shaft drivetrain features an optimized internal ratio, and high-speed ball-bearings for great efficiency.
The original aluminum main drive shaft has been replaced by a CNC-machined & hand-ground main drive shaft of high-grade graphite. Being ? the weight of the original, this translates into much better acceleration and vibration-free power transmission between front and rear gearboxes.
Also new to the M18T PRO is a steel spur gear that really shines when used in dusty and/or outdoor conditions. An aluminum or steel pinion gear (available separately) must be used with the steel spur gear.
New nickel-plated pivot balls replace the original composite versions, and are very good when running in dusty conditions. If prefered you can still use standard composite pivot balls which are included in the kit as well.
The M18T PRO features an adjustable turnbuckle set for front and rear toe adjustment.
The M18T PRO motor holder is CNC-machined from high-strength aluminum, and is strategically machined for optimum strength, durability, and lightness.
The spring set of the NT18T nitro micro truck has been included in the M18T PRO kit. The set included 2 front springs (short) and 2 rear springs (long) of medium hardness.
M18T PRO includes: � set of low-pin rubber tires + wheels � 1/18 micro racing truck body (long) � pinion set
Not included: � radio system (transmitter and receiver) � micro speed controller � micro motor � micro battery pack, battery charger, transmitter batteries � micro servo � polycarbonate (Lexan�) paint � CA glue � tools
Technical specifications:
Length without body: 228mm
Front Width: 178mm
Rear Width: 180mm
Wheelbase: 166mm
Running Weight: 618g
Internal Gear Ratio: 2.5
The M18T PRO chassis is all new, designed specifically for high-performance racing. The 2.0mm thick chassis has been optimized for strength in high-grip racing conditions, while still being flexible enough for low-grip track conditions. The length of the chassis has been optimized for better racing and jumping; it is now 16mm longer.
The chassis is CNC-machined from the premium high-grade carbon fiber (graphite) material on ultra-precise German CNC routing machines, ensuring the highest precision and tolerances in all critical areas.
An inline 6-cell battery pack sits on the left side of the chassis, with composite battery holders ensuring the pack stays in place.
The top deck has been completely redesigned and re-engineered. CNC-machined from premium high-grade carbon fiber (graphite), the top deck is much better suited to survive hard impacts while keeping set-up and geometry unchanged.
The top deck features a smart design to ensure that all bulkhead and arm mounting screws are easily and instantly accessible.
The 6-cell inline battery pack is held in place by a CNC-machined battery holder made from premium carbon fiber, completed with a stylish, milled �X� The chassis features battery backstops to keep the the pack in place even after serious crashes. The battery stops may be mounted in two different positions to accommodate side-by-side or inline battery packs.
The composite drive shafts of the M18T have been replaced with the HUDY Spring Steel� drive shafts. Manufactured from world-renowned top-secret HUDY Spring Steel�, these race-quality drive shafts are the smallest in the world, exclusively manufactured by HUDY. The drive shaft have been strategically lightened to reduce rotating mass without compromising strength or durability.
The ultra-efficient drivetrain from the coveted M18T has been carried over to the M18T PRO, as it has proven itself to be the most efficient and effective micro car drivetrain system. The inline, super-efficient single drive shaft drivetrain features an optimized internal ratio, and high-speed ball-bearings for great efficiency.
The original aluminum main drive shaft has been replaced by a CNC-machined & hand-ground main drive shaft of high-grade graphite. Being ? the weight of the original, this translates into much better acceleration and vibration-free power transmission between front and rear gearboxes.
Also new to the M18T PRO is a steel spur gear that really shines when used in dusty and/or outdoor conditions. An aluminum or steel pinion gear (available separately) must be used with the steel spur gear.
New nickel-plated pivot balls replace the original composite versions, and are very good when running in dusty conditions. If prefered you can still use standard composite pivot balls which are included in the kit as well.
The M18T PRO features an adjustable turnbuckle set for front and rear toe adjustment.
The M18T PRO motor holder is CNC-machined from high-strength aluminum, and is strategically machined for optimum strength, durability, and lightness.
The spring set of the NT18T nitro micro truck has been included in the M18T PRO kit. The set included 2 front springs (short) and 2 rear springs (long) of medium hardness.
M18T PRO includes: � set of low-pin rubber tires + wheels � 1/18 micro racing truck body (long) � pinion set
Not included: � radio system (transmitter and receiver) � micro speed controller � micro motor � micro battery pack, battery charger, transmitter batteries � micro servo � polycarbonate (Lexan�) paint � CA glue � tools
Technical specifications:
Length without body: 228mm
Front Width: 178mm
Rear Width: 180mm
Wheelbase: 166mm
Running Weight: 618g
Internal Gear Ratio: 2.5
